|
n |
AUTOMOTIVE & MOBILE EQUIPMENT MAINTENANCE SUBJECTS |
COURSE
DUR./DAYS |
| 1 |
Air Brake & Pneumatic Systems - Hvy. Vehicles (Can include ABS electronics in longer dur. class) |
1 - 2 |
| 2 |
Air Conditioning - Mobile Equipment (Incl. CFC Recovery/Recharge Systems, R12 to 134 conv.) |
1 - 2 |
| 3 |
Alternative Fueled Engines - Troubleshooting (CNG, LNG, Propane) |
2 |
| 4 |
Anti-Lock Brake Systems - Air Brakes |
½ - 1 |
| 5 |
Anti-Lock Brake Systems - Light Duty Trucks (ABS), or Passenger Cars (ABS) |
½ - 1ea. |
| 6 |
Diagnostics - Electronics Troubleshooting (Hands-On Workshop) -Applies to LD & HD |
1 - 2 |
| 7 |
Diesel Electronic Engine Controls (Med. HD Diesels) -Emphasis on electronic controls |
2 |
| 8 |
Diesel Troubleshooting & Electronics (Med. HD Diesels) -Incl. review of diesel principles & mech. Inj. |
2 - 3 |
| 9 |
Driveability Troubleshooting & OBD II (OBD II, and advanced engine performance diagnostics) |
2 |
| 10 |
Electric Material Handling Equipment - Troubleshooting |
2 - 3 |
| 11 |
Electrical/Electronic Systems Troubleshooting (Applies to Light & Heavy Duty) |
2 - 3 |
| 12 |
Electronic Diesel Powertrain Trblshtng. (LD Diesels) 6.0 & 7.3L Ford, 6.5 & 6.6L GM, 5.9L Cummins |
2 |
| 13 |
Emergency Vehicle Troubleshooting |
1 |
| 14 |
Equip. Preventative Maintenance & Inspection-Light & Hvy. Duty (Combined/Separate) |
1 - 2 |
| 15 |
Heavy Duty Diagnostics - Electronics Troubleshooting (Hands-On Workshop) |
1 |
| 16 |
Supplemental Restraint Systems (Air Bags and other restraint systems troubleshooting) |
½ - 1 |
| 17 |
Transmission Troubleshooting - H.D. Automatics and/or (Clutch & Manual Tran. Trblshtng.) |
2 ea. |
| 18 |
Transmission Troubleshooting - L.D. Automatics - Passenger Cars, Trucks |
2 |
| 19 |
Welding - Basic (Maintenance) and/or Welding - Advanced (Certification Preparation) |
2 - 3ea. |
|
HYDRAULICS/FLUID POWER SUBJECTS |
|
| 20 |
Troubleshooting Mobile Equipment Hydraulics |
2 |
| 21 |
Advanced Mobile Hydraulics - Extensive Hands-On Workshop |
2 |
| 22 |
Hydrostatic Drives |
2 |
| 23 |
Practical Hydraulics For; Equipment Operators/Mechanics and Parts Personnel |
½ - 1 |
|
n |
EQUIPMENT OPERATION & SAFETY SUBJECTS (Mostly Hands-On) |
|
| 24 |
Backhoe, Loader, Dump Trucks (Combined - Typical Public Works/Const. & Maint. Equip.) |
2 - 3 |
| 25 |
Bobcat/Skid-Steer |
1 - 2 |
| 26 |
* Boom Trucks (Hydraulic Truck Cranes) - Incl. Rigging & Safety |
½ - 1 |
| 27 |
* Bucket/Man-Lift (Aerial) Trucks (Includes: Powered Platforms, Vehicle Mounted Platforms) |
½ - 1 |
| 28 |
Const. & Maint. Equipment Operation & Safety - For Operators & For Supervisors |
½ - 1 |
| 29 |
* Cranes - Hydraulic, 5 to 60 Ton (Rough & All-Terrain/Hyd. Truck Cranes) and Rigging |
2 - 3 |
| 30 |
Driver Improvement Training, or preparation for CDL A or B licenses (call to discuss programs available) |
UA |
| 31 |
Equipment Transport - Loading/Unloading (Safety, proper tie-down, etc.) |
½ - 1 |
| 32 |
Excavator (Hydraulic - Crawler/Wheeled) |
2 - 3 |
| 33 |
* Material Handling Equipment/Fork Lifts New OSHA Standard 1910.178, Eff. 3/1/99 |
½ - 1 |
| 34 |
Motor Grader, Dozer (Also, can be done separately) |
2 |
| 35 |
Street Sweeper, Roller |
½ - 1 |
| 36 |
Tractor - With Mower Attachments (Flail/Rotary) or Mwr./Grounds Equipment Oper. |
2 |
| |
* NOTE: Although all of the above equipment is addressed in OSHA 29 CFR; Parts 1910,1926 / State Stnds.
as to general training requirements, those identified (*) have specific stipulations regarding training. |
|
|
n |
INDUSTRIAL MAINTENANCE/ENGINEERING SUBJECTS |
|
| 37 |
Advanced Industrial Hydraulics - Extensive Hands-On Workshop |
2 |
| 38 |
Air Conditioning & Refrigeration (Including CFC Recovery Systems) |
2 - 5 |
| 39 |
Auxiliary Power/Generator Sets |
2 - 3 |
| 40 |
Basic Electrical Systems-Troubleshooting & Controls-Electro/Mechanical & Electronic |
3 - 5 |
| 41 |
Hydrostatic Drives |
2 |
| 42 |
Industrial Electronics Troubleshooting (Incl. AC&R, Alarm & Fire Protection Controls) |
3 - 5 |
| 43 |
Industrial Hydraulic Systems |
3 |
| 44 |
Industrial Pneumatics, or Understanding Pneumatic Systems |
3 |
| 45 |
Welding—Advanced (Improve Techniques & Certification Preparation) |
2 - 3 |
| 46 |
Welding—Basic (Maintenance) |
2 - 3 |
| ITS/ASBLIST1 |
|
Serving Industry Areas Since 1984: Maintenance l Engineering l Operations l Safety l Inspection |
